KN-92 Manual Cleveland Open Cup Flash Point Tester

Flash point is used in shipping and safety regulations to define flammable and combustible materials. Consult the particular regulation involved for precise definitions of these classifications.

KN-92Z Automatic Cleveland Open Cup Flash Point Tester

Flash point can indicate the possible presence of highly volatile and flammable materials in a relatively nonvolatile or nonflammable material. For example, an abnormally low flash point on a test specimen of engine oil can indicate gasoline contamination

KN-92E Automatic Cleveland Open Cup Flash Point Apparatus

conforms to ASTM D92, we use electric igniter to ensure no gas touched during the test

KN-93 Manual Pensky-Martens Closed-Cup Flash Point Tester

The flash point temperature is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties which must be considered in assessing the overall flammability hazard of a material

KN-93Z Automatic Pensky-Martens Closed Cup Flash Point

The flash point temperature is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties which must be considered in assessing the overall flammability hazard of a material

KN-93E Automatic Pensky-Martens Closed Cup Flash Point Tester

KN-93E Automatic Pensky-Martens Closed Cup Flash Point Tester conforms to ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to test for those liquids which have a kinematic viscosity of 5.8mm2/s (cSt) or more at 37.8℃ or 9.5mm2/s (cSt) or more at 25℃ (77℉), or that contain suspended solids, or have a tendency to form a surface film while under test. These departments for liquids using these test methods have established other classification flash poin

KN-56Z Automatic Tag Closed Cup Flash Point Tester

KN-170 Abel Closed Cup Flash Point Tester

This International Standard specifies a method for the determination of the closed cup flash point of petroleum products and other liquids having flash points between -30℃ and 70℃ inclusive.

KN-170Z Automatic Abel Closed Cup Flash Point Tester

KN-170Z Automatic Abel Closed Cup Flash Point Tester conforms to IP170 Petroleum products and other liquids -- Determination of flash point -- Abel closed cup method and ISO 13736 Petroleum Products and Other Liquids - Determination of Flash Point - Abel Closed Cup Method and IP170 Determination of flash point - Abel closed-cup method. This International Standard specifies a method for the determination of the closed cup flash point of petroleum products and other liquids having flash points bet

KN-3828 Small Scale Closed Cup Flash Point Teste

KN-3828 Small Scale Closed Cup Flash Point Tester conforms to ASTM D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester. Flash point measures the response of the test specimen to heat an ignition source under controlled laboratory conditions. It is only one of a number of properties that must be considered in assessing the overall flammability hazard of a material. Flash point is used in shipping and safety regulations to define flammable and combustible materials and cla