KN-86 Distillation Apparatus for Petroleum Products (basic model, single tube)

KN-86 Distillation Apparatus for Petroleum Products is a new designed distillation tester. It conforms to standard ASTM D86 StandardTest Method for Distillation of Petroleum Products at Atmospheric Pressure ,which is suitable for light and middle distillates, automotive spark-ignition engine fuels with or without oxygenates, aviation gasolines, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 %, marine fuels, special petroleum spirits, naphthas, white spirits, kerosines, and Grad

KN-86A Double Tubes Distillation Apparatus

The basic test method of determining the boiling range of a petroleum product by performing a simple batch distillation has been in use as long as the petroleum industry has existed.

KN-86Z Automatic Distillation Apparatus for Petroleum Products

KN-86D Automatic Distillation Apparatus for Petroleum Products is a new designed distillation tester. It conforms to standard ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure , which is suitable for testing distillation of light and middle distillates, automotive spark-ignition engine fuels with or without oxygenates, aviation gasoline, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 %, marine fuels, special petroleum spirits, naphthas,

KN-7345 Automatic Micro Distillation Apparatus

KN-7345 Automatic Micro Distillation Apparatus conforms to ASTM D7345 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method). The distillation (volatility) characteristics of hydrocarbons have an important effect on their safety and performance, especially in the case of fuels and solvents. The boiling range gives information on the composition, the properties, and the behavior of the fuel during storage and use. Volatility is the major de

KN-1160 Vacuum Distillation Apparatus

The sample is distilled at an accurately controlled pressure between 0.13 and 6.7 kPa (1 and 50 mm Hg) under conditions that are designed to provide approximately one theoretical plate fractionation. Data are obtained from which the initial boiling point, the final boiling point, and a distillation curve relating volume percent distilled and atmospheric equivalent boiling point temperature can be prepared.

KN-4006A Water in Crude Oil Apparatus （Distillation Method）

The sample is heated under reflux conditions with a water immiscible solvent which co-distills with the water in the sample. Condensed solvent and water are continuously separated in a trap—the water settles in the graduated section of the trap, and the solvent returns to the distillation flask

KN-95 Dean Stark Distillation Water Content

A knowledge of the water content of petroleum products is important in the refining, purchase, sale, and transfer of products.

KN-6304V Water Oven

Disposable vials can be used to take samples for heating vaporization, which is for standard weight solid or quasi-solid samples, such as: plastic particles, toner, inorganic salts, battery separators, liquid crystals, coatings, food, pharmaceuticals, etc. Working principle: The water in the sample is vaporized through the heater, and the water is carried into the reaction bottle by high-purity nitrogen as the carrier gas to participate in the Karl Fischer reaction, so as to obtain the water co

Vaporizer

1. The analysis of trace water, trace oxygen, trace carbon monoxide, carbon dioxide, trace sulfur, trace carbonyl compounds in ethylene, propylene, butane and other gases can be combined with coulometric trace moisture analyzer, dew point meter, trace oxygen analyzer, gas chromatograph With the use of. 2. Convert liquid samples into gaseous hydrocarbons of equal composition, constant temperature, constant pressure, and controllable flow rate. 3. After the liquid sample is heated and vaporized,

KN-6304 Coulometric Karl-Fischer Titration Tester

A knowledge of the water content of lubricating oils, additives, and similar products is important in the manufacturing, purchase, sale, or transfer of such petroleum products to help in predicting their quality and performance characteristics